Home > Product >  Loud Speaker Phone   >  
Industrial Loud speaking telephone

Industrial Loud speaking telephone

model:KNSP-08L2
size:320*205*120mm
material:Aluminum alloy and SUS304

outdoor telephone KNSP-08L2
voip KNSP-08L2
We are extra load phone manufacture for over 20 years. We sall our loud speaking telephone for over 120 countries. The telephone speaker are widely used in noise area like power plant and tunnel. Most noise are need amplified telephones with 30W Paging speaker. The telephone with built-in paging amplifier. The telephone speaker with external waterproof speaker. The paging system can speaking with people by this public address telephone.
water resistant telephone

 

KNSP-08  Loud speaking telephone

        We are extra load phone manufacture for over 20 years. We sall our loud speaking telephone for over 120 countries. The telephone speaker are widely used in noise area like power plant and tunnel. Most noise are need amplified telephones with 30W Paging speaker. The telephone with built-in paging amplifier. The telephone speaker with external waterproof speaker. The paging system can speaking with people by this public address telephone.


DESCRIPTION ITEM 

1. Robust aluminium alloy die-cast body, Vandal resistant and tamper-resistant hardware, simple installation. 

2. Full keypad with memory, 10 button programmable speed-dial telephone. 

3. Store button, Pick button, Redial button. 

4. Door cover: orient automatically and good self - closing, convenient for use. 

5. Weather resistant to IP66 standard, service temperature range from -30 degree to +75 degree

6. Magnetic reed hook-switch. 

7. Robust AC cord, AC power supply from 110V~240V. Built in battery(optional). 

8. Lightening protection to ITU-T recommendation K.21

9. Hearing Aid compatible receiver, Noise canceling microphone. 

10.Phone integrity wiring to enable the telephone system to check if the telephone unit is still operational. 

11. Optional 7 minute time out, to release the line if the handset is left off hook. 

12. All of the components including keypad, buzzer, circuit board and cabinet are designed to be

multiplayer waterproof and dust - proof which is up to Class III grade. 

13. With external 30W loud speaker.Material:metal. Impeddance:8Ω. Freq.Resp:300-7000HZ. S.P.L:(1M/W):108dB. Megenet:ALum

14. With external Lamp indicator. Red Flash Light.Work voltage: 12V DC/10W or powered by telephone.

 INSTALLATION 


 CERTIFICATION 

EN55022: emissions EN55024: immunity

Ingress Protection: GB4208-93 IP66 FCC ITU-T Recommendations K21

EMC: EN50121(Railway application-Electromagnetic Compatibility)

1509345987561265.png

 PACKAGING 


圖片2.png


Unit size: 320 *205 *120mm N.W: 3.9KG

1pcs packing box size: 439 *277 *191mm Unit N.W: 3.9KG Unit G.W: 5.7KG

6pcs in 1 outer Carton box: size: 730*390*340mm N.W: 24KG G.W: 29.6KG



You May Like:

KNDDT-1-AV21

Operator console center

NMS-X1 SNMP 

Unified network management system

KNSP-10 

Industrial telephone

KNSP-01

Weatherproof telephone




==>>>> Product Specification

 SPECIFICATION - Analogue(Model NO.SP08L2)

1. PSTN analogue telephone                                          2. DTMF dialing                

3. MTBF:100000hours                                                    4. MTTR: 2 hours                

5. Connection: RJ11 screw terminal pair cable               6. Sound level of ringing:over 70dB(A).

7. Call transmission index:(5KM)SLR<12,RLR<-1,stmr>10, output impedance is 600 Ohm.maximum distance: 7KM

8. Applicable for various types of SPC exchange PABX and dispatching exchange system with feeding voltage of 33-60V.

9. Connection: RJ11 screw terminal pair cable (or RJ11 Socket of plug upon request),with stainless steel cable protected

10. Super strong function is available for dialing 12 groups of numbers stored in the memory,(maximum length of each number is 16 digits)

11. Standard frequency:low frequency group:697. 770. 852. 941Hz,high frequency group:1209. 1336. 1477Hz, frequency deviation:-1.5% ~ +1.5%

12. Ambient temperature:-30 ~ +60 degree. Relative humidity:10%~95% Atmospheric pressure: 86~106Kpa Circumstance noise:less than 60dB(A)

 SPECIFICATION - VoIP(Model NO.SP08L2) 

1. VoIP SIP2.0 telephone                                              2. DTMF dialing                                                     

3. MTBF100000hours                                                   4. MTTR: 2 hours 

5. Auxiliary Contacts:1 Aux Output, dry contact            6. Rated load:0.3 A at 125 VAC; 1 A at 30 VDC

7. Contact Ratings. Load: Resistive load                      8. Echo cancellation code:G.167/G.168

9. Rated carry current:1A                                             10. Max.switching current:1A

11. Max.switching voltage:125 VAC,60VDC                 12. Audio Codes:G.711, G.722, G.729

13. IP Protocols:IPv4, TCP, UDP, TFTP, RTP, RTCP, DHCP, SIP

14. Free dial (maximum length of each number is 16 digits)            

15. Communication: Full duplex 2-way hands-free communication

16. Call Control Signaling:VOIP SIP Info(DTMF), RFC 2833(DTMF)

17. Network:10/100 BaseTX Ethernet, RJ45 connectors, Cat5e or better 

18. Power:Power over Ethernet, IEEE802.3af, Class 0  Local power, 12VDc,Idle 2W, Max 10W

19. Programming:Non-volatile flash memory programming and configuration through Web GUI

20. Management and Operation:DHCP and static IP, remote automatic software upgrade, centralized monitoring, status LED  

21. LAN Protocols:Power over Ethernet(PoE,802.3af), WLAN(IEEE 802.3af), Network Access Control(IEEE 802.1x),STP(IEEE 802.1d), RSTP(IEEE 802.1d-2004)


==>>>>Telephone System
 Water resistant telephone system

==>>>>Product Application

Industrial Loud speaking telephoneIndustrial Loud speaking telephone

Industrial Loud speaking telephone

==>>>>Product Detailed Pictures
Water resistant telephone Water resistant telephone part

==>>>>Product Video

==>>>>Please Email US
*
*
*
欧洲快乐赛车